USB Oscilloscope Hardware Specifications
- 4 Measurement channels
- Input range 0V to +5V (easily changed by adding 2 resistors, see FAQ section)
- 10 Bit resolution
- 500 samples / channel
- Trigger function on channel 1 (edge & level)
- 5 Clear status LEDs (RED / BLUE)
- Full USB 2.0 compatible
- USB type B connector
- Power consumption < 50 mA
- Sample time difference between all channels smaller < 5 usec
- Fully assembled and tested PCB
- Sample rates:
| Sample rate | Channel 1 | Channel 2 | Channel 3 | Channel 4 |
| 100 kHz | X | - | X | - |
| 40 kHz | X | X | X | X |
| 20 kHz | X | X | X | X |
| 10 kHz | X | X | X | X |
| 5 kHz | X | X | X | X |
| 1 kHz | X | X | X | X |
| 500 Hz | X | X | X | X |
| 100 Hz | X | X | X | X |
| 50 Hz | X | X | X | X |
Photo below shows the 4 channel USB Oscilloscope.
Board parts & Connectors
Photos below explain the main components and connectors of the USB Oscilloscope.
