• USB Oscilloscope

  • Introduction
  • Software
  • Hardware
  • Faq

• Wireless Sensors

  • Introduction
  • Software
  • Hardware
  • Faq

• Wireless Uart

• Signal Generator

• Shop

• Contact

Welcome to UsbScope.eu

On this website you will find some of the products which we have developed over the last years. Most of these products started as tools for our own developments. As some of them turned out to be very useful, we have made real products of them.

We now have available following tools & products:

• 4 Channel USB Oscilloscope
• Wireless Measurements System @ 433 MHz
• 20 MHz signal generator & frequency counter
• Wireless UART @ 433 MHz

Special Development
We are always looking for ideas for new products. So if you have any ideas or need help with your electronics and/or software projects, feel free to contact us through our feedback form. We might be able to use our experience and help you directly. Or we can make a dedicated tool for you.

We hope you enjoy our products and love to get feedback from you!

---

USB Scope Specifications

• 4 Measurement channels
• Input range 0V to +5V (easily changed by adding 2 resistors, see FAQ section)
• 10 Bit resolution
• 500 samples / channel
• Trigger function on channel 1 (edge & level)
• 5 Clear status LEDs (RED / BLUE)
• Full USB 2.0 compatible
• USB type B connector
• Power consumption < 50 mA
• Sample time difference between all channels smaller < 5 usec
• Fully assembled and tested PCB
• Sample rates:

Sample rate	Channel 1	Channel 2	Channel 3	Channel 4
100 kHz	X	-	X	-
40 kHz	X	X	X	X
20 kHz	X	X	X	X
10 kHz	X	X	X	X
5 kHz	X	X	X	X
1 kHz	X	X	X	X
500 Hz	X	X	X	X
100 Hz	X	X	X	X
50 Hz	X	X	X	X

---

Hardware

The 4 channel hardware

---

Software

Osilloscope Software

Logger Software